By means of relative motion between movable and fixed plates, the material is crushed by the impact and friction of the teeth plate. Change the sieve to control the output size.
To crush different materials, will use different material teeth plates to keep safety , change the screens to get the target particel size
When the machine grinder rotates, the motor drives the spindle and the cutter head to rotate at a high speed. The grinding block on the cutter head and the screen ring constitutes a crushing and grinding pair. When the material enters the machine cavity from the hopper, the material closely rubs and strongly impacts on the inner side of the blade of the cutter head in the rotary airflow of the cutter head. And grinding again in the gap between the blade and the grinding block. While pulverizing the material, the cutterhead draws in a large amount of air that acts to cool the machine, grind the material, and transport the fines. The fineness of material pulverization depends on the nature of the material and the size of the screen, as well as the throughput of the material and air.
The bearing components of the shredder are equipped with a special labyrinth seal that effectively prevents dust from entering the bearing cavity, thus extending the life of the bearing. The machine door is equipped with a silicone rubber sealing ring, which is free of dust and pollutes the operating environment.
1. Strong crushing ability, low energy consumption, relatively small product fineness
2. The large crushing space and the high-strength wind pressure generated during the operation of the cutter head can not only improve the production capacity, reduce the over-grinding phenomenon, but also effectively prevent the deposition and clogging of the screen during the crushing process.
3. Since the shearing is strengthened, the pulverizing ability of the fibrous material is higher than that of the general equipment.
4. The screen is easy to install and reliable in positioning, all of which are plug-in. The service life is much higher than the ring screen form.
5 Design built-in motors to reduce the center of gravity of the machine and effectively reduce equipment noise
low hardness materials
food (eg ginger, pepper, oil wheat, soybean, sugar, star anise, cinnamon)
This machine is dried pulverize , keep input material dry , welcome to contact with us to get techinical support .
The fineness is adjusted between 10-120 mesh and has high yield. The utility model has the advantages of fine granularity, low noise, low energy consumption, simple maintenance and convenient installation, and is particularly suitable for crushing processing of low hardness materials such as oiliness, viscosity, heat sensitivity and fiber.
dimension (L*W*H mm)
Feed size (mm)
Finished product size (μm)
There are three types teeth plates , based on the powder materials
Here is one pulverizer system fig , we can design for your requirement